- Giới thiệu
-
Sản phẩm
-
Phân phối
-
Phòng cháy chữa cháy
- Báo cháy
-
Chữa cháy
- Bình Chữa Cháy
- Trụ Cứu Hỏa
- Bơm Cứu Hỏa
- Cuộn Vòi Chữa Cháy
- Các Khớp Nối
- Lăng Phun
- Sprinkler
- Foam Chữa Cháy
- Tấm Phủ Dập Cháy
- Thiết Bị Trộn Bọt
- Thiết bị thở
- Khác...
- Quạt thông gió
- Thang chữa cháy
- Van điều khiển
- Thiết bị, dây chuyền nạp bình chữa cháy
- Thiết bị thử áp lực, rửa, buộc cuộn vòi
- Bình chữa cháy chuyên dụng cho xe hơi
- Đèn dùng trong công nghiệp, quân sự & dầu khí
- Bột chữa cháy các loại
- Hệ thống chống cháy nổ
- Chuyên ngành dầu khí
- Thiết Bị Cứu sinh
- An toàn điện
- Bảo hộ lao động
- Thiết bị thi công
- Đo lường
- An ninh
- Thiết bị Nhất Thứ
- Chống sét
- Điện nhẹ
-
Phòng cháy chữa cháy
- Sản xuất
-
Phân phối
- Dịch vụ
- Dự án
- Chuyên đề - Tin tức
- Sơ đồ web
- Liên hệ
- Catalogue
Danh mục sản phẩm
- Phân phối
- Phòng cháy chữa cháy
- Báo cháy
- Trung tâm báo cháy địa chỉ
- Trung tâm báo cháy thông thường
- Nút nhấn khẩn báo cháy
- Đầu báo cháy địa chỉ và thông thường
- Chuông, đèn & còi báo cháy
- Module báo cháy
- Khác...
- Chữa cháy
- Bình Chữa Cháy
- Trụ Cứu Hỏa
- Bơm Cứu Hỏa
- Cuộn Vòi Chữa Cháy
- Các Khớp Nối
- Lăng Phun
- Sprinkler
- Foam Chữa Cháy
- Tấm Phủ Dập Cháy
- Thiết Bị Trộn Bọt
- Thiết bị thở
- Khác...
- Quạt thông gió
- Thang chữa cháy
- Van điều khiển
- Thiết bị, dây chuyền nạp bình chữa cháy
- Thiết bị thử áp lực, rửa, buộc cuộn vòi
- Bình chữa cháy chuyên dụng cho xe hơi
- Đèn dùng trong công nghiệp, quân sự & dầu khí
- Bột chữa cháy các loại
- Hệ thống chống cháy nổ
- Chuyên ngành dầu khí
- Hệ Thống FM200
- Tủ Điều Khiển Đầu Giếng
- Thiết Bị, Hệ Thống Đo Lường
- Rọ cẩu người
- Hệ Thống Lạnh
- Thiết Bị Cứu sinh
- An toàn điện
- Găng cách điện
- Ủng cách điện
- Thảm cách điện
- Nón cách điện
- Quần áo chống điện trường
- Sào cách điện
- Sào tiếp địa
- Tiếp địa di động
- Khác...
- Bảo hộ lao động
- Ủng quân đội
- Quần áo BHLĐ
- Găng tay sợi
- Giầy bảo hộ
- Nón bảo hộ
- Găng tay chống dầu/axit
- Ủng chống dầu/axit
- Quần áo chịu nhiệt
- Găng tay chịu nhiệt
- Ủng chịu nhiệt
- Bịt tay chống ồn
- Kính bảo hộ
- Dây an toàn
- Dây chống rơi
- Dây leo núi
- Dây thoát hiểm
- Mặt nạ hàn
- Mặt nạ phòng độc
- Khác...
- Thiết bị thi công
- Sản Phẩm Và Nhà Cung Cấp
- Máy tời
- Máy Kéo - Máy Thắng
- Kẹp Dây
- Dụng Cụ Thủy Lực
- Dụng Cụ Ép Thủy Lực
- Dụng Cụ Cắt Thủy Lực
- Đột Thủy Lực
- Bơm Thủy Lực
- Khác...
- PaLăng - Kích Xích
- Xe Ra Dây
- Rọ kéo dây
- Khác...
- Đo lường
- Đo Lường Điện
- Ampe Kềm
- VOM
- Đo Điện Trở Cách Điện
- Đo Điện Trở Đất
- Đo Điện Trở Tiếp Xúc
- Đo Chất Lượng Điện Năng
- Bút Thử Điện
- Khác...
- Đo Lường Không Điện
- Máy Đo Nhiệt Độ
- Máy Đo Độ Cao
- Máy Dò Khí Cầm Tay
- Máy Đo Độ Dày Lớp Mạ
- An ninh
- Hệ Thống Âm Thanh Thông Báo
- Bộ Điều Khiển Trung Tâm
- Bộ tiền khuyếch đại
- Loa âm trần
- Loa hộp treo tường
- Nút điều chỉnh âm lượng
- Bàn gọi
- Bàn gọi mở rộng
- Hệ Thống Camera Quan Sát
- Đầu ghi hình trung tâm
- Camera Bán cầu
- Camera cố định
- Camera quan sát PTZ
- Camera đầu đạn
- Thiết bị Nhất Thứ
- Dao Cách Ly
- Máy Cắt
- Biến Dòng Điện
- Biến Điện Áp
- Chống Sét Van
- Cuộn Kháng
- Chống sét
- Kim Thu Sét
- Chống Sét Lan Truyền
- Điện nhẹ
- Sản xuất
- Dây an toàn
- Tiếp địa
- Puly
- Biển báo an toàn các loại
- Bảo hộ lao động
- Quần áo bảo hộ lao động
- Găng tay sợi
- Máy tời
- Khác...
Hãng cung cấp
- HONEYWELL
- MEDC
- FIKE
- KEY
- SPERIAN
- DRAEGER
- PAN TAIWAN
- PROTECTA
- SAF-T-GARD
- FOMTEC
- KIDDE
- OCV
- MULTRON
- EXCALOR
- NORTH
- BULLARD
- BILLY PUGH
- SEW
- SONEL
- FLIR
- NEWAGE
- PROTEK
- SICK
- YOTSUGI
- GENSET
- PAT NGK
- NINGBO
- FUJII DENKO
- SMC
- QMATIC
- KING'S
- VIỆT NAM
- FAMECA
- 3M
- BH
- SALISBURY
- MIRCOM
- SECUTRON
- HASTING
- SIEMENS
- ALSTOM
- ABB
- TRENCH
- TYCO
- TOSHIBA
- NGK
- OBO
- KYORITSU
- HIOKI
- HAGLOF
- LEICA
- INGESCO
- PULSAR
- PRODUCTOS MESA
- KAC
- SHIN YI
- KLEIN TOOLS
- TRUNG QUỐC
- LHRMarine
- DANIAMANT
- HWASEUNG EXWILL
- PROTECTOR
- IZUMI
- KHÁC
- TEMA
- CHAUVIN ARNOUX
- FLUKE
- AMPROBE
- DEFELSKO
- Koronakis
- GOULDS
- BOSCH
- AXIS
- EUROGARDIAN
- ProPHOS
- POTTER ROMER
- SHIJIAZHUANG
- SCA SPECIAL CHEMICAL
- LARSON
- BARTH
- EXCESS
- JUST
- EURAMCO SAFETY
- FirePASS
Dự án
- Dự án biển
- Hệ Thống HVAC
- Hệ Thống FM-200
- Tủ điều khiển giếng khoan
- Hệ thống đo đếm khí gas
- Dự án đất liền
- Điện nhẹ
- Phòng cháy chữa cháy
- Chống sét
- HVAC
- An ninh, Mạng máy tính
- Mô hình huấn luyện an toàn bay
- Kho thông minh
- Hê thống Sơn tự động
- Hệ thống Nạp bột bình chữa cháy
- Bảo trì, Sửa chữa hệ thống PCCC, HVAC, CS
Liên kết website
1. 245 kV CIRCUIT BREAKER | |||
1 | Manufacturer/Country of Origin | Siemens Ltd., India | |
2 | Ordering number |
Type: 3AP1 FG (Three Pole) Type: 3AP1 FI (Individual Pole) |
|
I | Substantial requirements | ||
1 | Applicable standard | IEC 62271-100 | |
2 | Type | Outdoor, three-pole operation | |
Outdoor, three single-pole operation | |||
3 | Interrupter units per pole | 1 | |
4 | Insulating medium | SF6 | |
5 | Rated voltage | kV | 220 |
6 | Highest system voltage | kV | 245 |
7 | Rated frequency | Hz | 50 |
8 | Rated current (In) | A |
Type 1: ≥1250 A Type 2: ≥2000 A |
9 | Rated three phase symmetrical short-circuit breaking current | kA rms. | 40 |
10 | Rated three phase symmetrical short circuit making current | kA peak | 100 |
11 | Rated duration of short-circuits | s | 3 |
12 | Rated Operating Sequence | O-0.3s-CO-3min-CO | |
13 | Lightning impulse voltage (1.2/50ms) withstand to earth | kV peak | 1050 |
14 | One minute power frequency voltage withstand to earth 50 Hz | kV rms. | 460 |
15 | First-pole-to-clear factor | 1,3 | |
16 | Minimum creepage distance | mm/kV | 25 |
17 | Operating mechanism |
3AP1 FG-Three-pole and 3AP1 FI- single pole |
|
18 | Operating mechanism drive type | Spring | |
19 | Minimum clearance between phase | mm | 2385 (type tested) |
20 | Minimum clearance to earth | mm | 2100 (type tested) |
21 | Operating times: (*) | ||
- Opening time | ms | 37+4 | |
- Closing time | ms | < 80 | |
- Break time | ms | < 60 | |
- Arcing time | ms | 25 | |
22 | Maximum time on auto-reclose of : (from trip energisation to instant of reclose main contacts) | ms | 3-30s three phases |
23 | Resistance of main contact (new contact) | mW | < 50 |
24 | Rated out-of phase breaking current | kA | 10 |
25 | Rated line charging breaking current | A rms. | 125 |
26 | Rated cable charging breaking current | A rms. | 250 |
27 | Rated small inductive breaking current | A rms. | (0-20)A at no load |
28 | Rated transient recovery voltage for terminal faults (T100) | kV peak | 364 kVp |
29 | Auxiliary power supply | ||
- Voltage for heating and spring charged motor | Vac | 220 | |
- Control, closing & tripping voltage | Vdc | 220 | |
30 | Number of tripping coil | pcs | 2 |
31 | Mechanical operation duration (In - class M2) | time |
10000 (at no load) (closing-opening) |
32 | Times tripping of 20kA (40kA) short circuit current without repair |
18 at 40kA 30 at 10kA |
|
33 | Power of closing, tripping coil of CB for all three phases | VA | < 1200 |
34 |
Type test for Mechanical operation duration (The contractor must provide type tests to demonstrate the parameters offered.) |
yes | Yes (enclosed) |
35 | Gas leakage rate | ≤0.5 %/year | |
36 |
Wired Control cubicle including: +Anti-pumping device + Pole discrepancy device + Local/remote control switch + SF6 density meter with alarm/trip contact + Auxiliary contact: at least 12NO & 12NC + Auxiliary contacts for charged spring signal and motor control + Heating and lighting device |
Yes Pole discrepency device not applicable for 3 pole operated breaker of type :3AP1 FG |
|
37 |
Common local control cabinet : - For type of single-pole circuit breaker, the common local control cabinet (combined from local control cubicles of three single - pole circuit breaker) must be equipped. The common local control shall allow operating independently closing/opening on each phase and operating simultaneously closing/opening on three phases of circuit breaker. Common control cabinet with connecting cables for electrical coupling of control cabinet with operating mechanism cubicle on each phase |
Yes | |
38 | Cabinets of the CB |
sheet steel; surface treated for anti-oxidation and paint coated with Zinc spray & polyurethene with ingress protection class of IP 55. |
|
39 | Steel structure | ||
Height steel structure | mm | Yes | |
Operating floor | Yes/No | Yes | |
Height operating floor | mm | Yes | |
40 | Insulator | Porcelain, brown | |
II | Non-substantial requirements | ||
1 | First-pole-to-clear factor | 1,3 | |
2 | Rated capacitive breaking current | A rms. | 400 (single phase) |
3 | Number of spare auxiliary contact | ||
Normally opened | pcs | 12 | |
Normally closed | pcs | 12 | |
4 | Materials of terminals | ||
HV | Aluminium Alloy | ||
5 | Steel structure | ||
Type | yes | ||
Materials | yes | ||
Height of structure | mm | yes | |
III | Requirements for information | ||
1 | Rated times quanlities of circuit breaker | ||
Opening time (no-load) | ms | 41ms (max) | |
Closing time (no-load) | ms | 80ms (max) | |
Open-close time (no-load) | ms |
380ms (including 300ms dead time) |
|
Reclosing time (no-load) | ms |
400ms (including 300ms dead time) |
|
Close-open time (no-load) | ms | 90ms | |
2 | SF6 gas | ||
SF6 mass for one three-pole circuit breaker | kg | 21kg (3 pole) | |
Rated SF6 density | kg/m3 | Pressure - 6.0 Bar @ 20 deg C (Rated) | |
First threshold of SF6 density | kg/m3 | Pressure - 5.2 Bar @ 20 deg C (Alarm) | |
Second threshold of SF6 density | kg/m3 | Pressure – 5.0 Bar @ 20 deg C (Trip/Lockout) | |
SF6 gas pressure density gauss | SF6 gas density monitoring device | ||
3 | Max. noise level at 3 meters distance due to operation of circuit breaker | dB | ≤ 140dB |
4 | Max. impact load due to circuit breaker operation | kg |
23kN (Closing) 28kN (Opening) |
5 | Rated mechanical terminal load kN | kN | 2kN |
6 | Total weight of complete circuit breaker | kg | 3500kg (approx.) |
7 | Terminals (Dimensions : Holes - No. , size and spacing) | Please refer outline drawing | |
HV | |||
8 | Drawings of steel structure | Yes/No | Yes |
STT | ĐẶC TÍNH KỸ THUẬT | ĐƠN VỊ | |
No | Specifications | Unit | |
2. 123 kV CIRCUIT BREAKER | |||
1 | Manufacturer/Country of Origin | Siemens Ltd., India | |
2 | Ordering number | CB Type: 3AP1 FG | |
I | Substantial requirements | ||
1 | Applicable standard | IEC 62271-100 | |
2 | Type | Outdoor, 3 phase | |
3 | Insulating medium | SF6 | |
4 | Rated voltage | kV | 145 |
5 | Highest system voltage | kV | 123 |
6 | Rated frequency | Hz | 50 |
7 | Rated current (In) | ||
Type 1 | A | 2000 | |
Type 2 | A | 1250 | |
8 | Rated three phase symmetrical short-circuit breaking current | kA rms. | 40 |
9 | Rated three phase symmetrical short circuit making current | kA peak | 100 |
10 | Rated duration of short-circuits | s | 3 |
11 | Rated Operating Sequence | O-0.3s-CO-3min-CO | |
12 | Lightning impulse voltage (1.2/50ms) withstand to earth | kV peak |
650 kV peak (up to 1000m masl) |
13 | One minute power frequency voltage withstand to earth 50 Hz | kV rms. |
275 kV rms. (up to 1000m masl) |
14 | Minimum creepage distance | mm/kV | 25 (3625mm) |
15 | Operating mechanism | Three-pole | |
16 | Operating mechanism drive type | Spring | |
17 | Minimum clearance between phase | mm | 1360 |
18 | Minimum clearance to earth | mm | 1250 |
19 | Operating times: (*) | ||
- Break time | ms | < 80 | |
- Arcing time | ms | < 25 | |
- Opening time | ms | < 60 | |
- Closing time | ms | < 70 | |
Maximum time on auto-reclose of : (from trip energisation to instant of reclose main contacts) | ms | 3-30s three phases | |
20 | Resistance of main contact (new contact) | mW | < 35 |
21 | Rated out-of phase breaking current | kA | 10kA |
22 | Rated line charging breaking current | A rms. | 50A |
23 | Rated cable charging breaking current | A rms. | 160A |
24 | Rated small inductive breaking current | A rms. |
(0-20)A (no load small magnetizing breaking current) |
25 | Rated transient recovery voltage for terminal faults (T100) | kV peak | 249kVp |
26 | Auxiliary power supply | ||
- Voltage for heating and spring charged motor | Vac | 220 | |
- Control, closing & tripping voltage | Vdc | 220 | |
27 | Number of tripping coil | pcs | 2 |
28 | Mechanical operation duration (In - class M2) | time |
10,000 cycles (closing-opening) |
29 |
Type test for Mechanical operation duration (The contractor must provide type tests to demonstrate the parameters offered.) |
yes | Yes |
30 | Gas leakage rate | ≤0.5 %/year | |
31 |
Wired Control cubicle including: +Anti-pumping device + Pole discrepancy device + Local/remote control switch + SF6 density meter with alarm/trip contact + Auxiliary contact: at least 12NO & 12NC + Auxiliary contacts for charged spring signal and motor control + Heating and lighting device |
Yes Pole discrepency device not is applicable for 3 pole operated breaker of type :3AP1 FG |
|
32 | Cabinets of the CB |
sheet steel; surface treated for anti-oxidation and paint coated with Zinc spray & polyurethene with ingress protection class of IP 55. |
|
33 | Height operating floor | mm | yes |
34 | Isolator |
Porcelain, brown (Insulator) |
|
II | Non-substantial requirements | ||
1 | First-pole-to-clear factor | 1,3 | |
2 | Rated capacitive breaking current | A rms. | 400 |
3 | Number of spare auxiliary contact | ||
Normally opened | pcs | 12 | |
Normally closed | pcs | 12 | |
4 | Materials of terminals | ||
HV | material | Aluminium Alloy | |
5 | Steel structure | ||
Type | Yes | ||
Materials | Yes | ||
Height steel structure | mm | Yes | |
III | Requirements for information | ||
1 | Rated times quanlities of circuit breaker | ||
Opening time (no-load) | ms | 32+4 | |
Closing time (no-load) | ms | < 80 | |
Open-close time (no-load) | ms | 360ms (including 300ms dead time) | |
Reclosing time (no-load) | ms | 400ms (including 300ms dead time) | |
Close-open time (no-load) | ms | 80ms | |
2 | SF6 gas | ||
SF6 mass for one three-pole circuit breaker | kg | 8.1 kg (3 pole) | |
Rated SF6 density | kg/m3 | Pressure - 6.0 Bar @ 20 deg C (Rated) | |
First threshold of SF6 density | kg/m3 | Pressure - 5.2 Bar @ 20 deg C (Alarm) | |
Second threshold of SF6 density | kg/m3 | Pressure – 5.0 Bar @ 20 deg C (Trip/Lockout) | |
SF6 gas pressure density gauss | SF6 gas density monitoring device | ||
3 | Max. noise level at 3 meters distance due to operation of circuit breaker | dB | ≤ 140dB |
4 | Max. impact load due to circuit breaker operation | kg |
Opening = 20 kN Closing = 15 kN |
5 | Rated mechanical terminal load kN | kN | 2 kN. |
6 | Minimum clearance between poles | mm |
1360 mm (Air clearance); 1700 mm (Pole center to center) |
7 | Minimum clearance to earth | mm | 1250mm (Phase to earth clearance) |
8 | Total weight of complete circuit breaker | kg | 1500kg (approx.) |
9 | Terminals (Dimensions : Holes - No. , size and spacing) | Please refer GA drawing | |
HV | |||
10 | Drawings of steel structure | Yes/No | Yes |
Sản phẩm liên quan